Axminster UE-125DV Manuel d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Axminster UE-125DV. Axminster UE-125DV 16 pages. Portable bandsaw machine

Imprimer la page

Fig. 15

Fig. 16

SHUT OFF THE POWER SOURCE BEFORE

THIS MACHINE IS IN ADJUSTMENT,

MAINTENANCE, OR REPAIRMENT.

Changing the Motor Carbon

Brushes

If the motor is making an unusual noise then the

carbon brushes may need to be replaced.

Disconnect machine from power supply.

Remove two tap screws connected with

on/off switch's box, and three Phillips head

screws around cover base. (Fig. 17)

There are two plastic covers on the motor

(Fig.18) after uncovering the motor's cover.

Remove plastic covers.

There are coppers sheet with wiring

covered on the carbon brushes (Fig.19).

Slide copper sheet to the one way (Fig.20),

the carbon brush will jumps out (Fig.21).

Replace the carbon brushes (Fig. 22) .

Both brushes must be replaced at the

same time.

Replace the carbon brushes' cover and

motor cover.

WARNING

- 10 -

Fig. 17

Fig. 18

Fig. 19

Fig. 20

Fig. 21

Carbon brush

Fig. 22