Axminster WORKSHOP AW205WL Manuel d'instructions original - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions original pour {nom_de_la_catégorie} Axminster WORKSHOP AW205WL. Axminster WORKSHOP AW205WL 17 pages. Woodturning lathe
Imprimer la page
LATHE FOOTPRINT
SET-UP PROCEDURES
Operating Height
Postion the lathe on the work bench, make sure
the surface is level and free of clutter. Tip. The
correct operating height is 'Elbow Height to
Centres', Stand in front of the lathe and check
that your elbow is level with the drive and live
centres, see diagram.
Tailstock Barrel Adjustment
The tailstock incorporates three grab screws to remove
any play inside the barrel housing. Adjust the grub
screws in small increments until the barrel moves freely
without any excess play, see figs 07.
Distance between
centres 330mm
730mm
8
Banjo & tool
rest travel
400mm
Centres
Bench
Fig 07