Axminster SIEG G1 Engineer Series Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Axminster SIEG G1 Engineer Series. Axminster SIEG G1 Engineer Series 16 pages. Powered hacksaw
Également pour Axminster SIEG G1 Engineer Series : Manuel de l'utilisateur (16 pages)
Imprimer la page
Gerneral Instructions for 230V Machines
Do not work with cutting or boring tools of any
description if you are tired, your attention is
wandering or you are being subjected to
distraction. A deep cut, a lost fingertip or worse, is
not worth it!
Do not use this machine within the designated safety
areas of flammable liquid stores or in areas where
Specific Safety for the Powered Hacksaw
1. Make sure that the blade is sharp, undamaged and
of the correct type for the material being processed.
2. Make sure that the material is clamped firmly in
the vice jaws, any movement will result in a blade
fracturing, possibly producing shards of blade
material.
3. Make sure that the blade is correctly tensioned, a
loose blade will have a shortened life and may break.
4. Make sure that long lengths of stock are
adequately supported, the machine vice jaws are
not designed for this purpose.
there may be volatile gases. There are very expensive,
very specialised machines for working in these
areas, THIS IS NOT ONE OF THEM.
Above all, OBSERVE.... make sure you know what is
happening around you, and USE YOUR COMMON
SENSE. IT IS RECOMMENDED THAT YOU WEAR EAR
PROTECTION IF YOU ARE USING THIS MACHINE.
5. Check for damaged parts, any part that is damaged
must be assessed to ensure that it can carry out its
function properly. If it cannot, it must be replaced
before the machine is used.
6. Never leave the machine running unattended.
When you have finished your cutting operations, turn
the power supply off. Do not leave the machine until
it has come to a complete stop.
7. Be aware that the blade will become very hot
during cutting, if you need to change the blade
during a cutting operation, allow the blade to cool
before changing it.
6