Axminster AHBGDL Hobby Series Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Axminster AHBGDL Hobby Series. Axminster AHBGDL Hobby Series 16 pages. Wide stone grinder

Imprimer la page

Identification & Description of the Grinder

Grinding

machine

Wheel guards

Tool rests

Eye shield/

spark guards

ON/OFF switch

Hold down holes Four 8mm holes set in a matrix in the corner flanges of the chassis to

Essentially a double ended motor, with a mounting base, the motor

flanges mount the wheel guards. The motor base contains the On/Off

NVR switch.

Two formed metal guards that enclose the grinding wheels. They

are each formed in three parts. The inner part is mounted onto the

motor flange, The stone cover is 'sprung' into the lip of the inner part

and the outer part is located on it. The whole assembly is bolted

together. There are various 'hard point locations' that accept the fixing

bolts that secure the attachments of the machine.

Formed metal plates that bolt onto a hard point on the inside cover of

the wheel guard. There is an elongated slot in the rest which gives

adjustment along the coach bolt fixing.

Clear protective shields that mount over the grindstone to afford a

view of the workpiece, but offer protection for the eyes, They are

mounted onto the spark guards making a complete assembly that bolts

through a hard point on the upper part of the stone cover. The spark

guard itself has an elongated slot to allow positioning and adjustment as

the wheel diameter decreases. Their function is to contain,any material

(esp. sparks) that would be tracked around the grindstone and sprayed

out of the machine esp. over the hands.

A NVR double button switch panel, marked 'I' for On and 'O' for Off. The

NVR function ensures the machine will not be left in the 'ON' condition,

in the event of a power failure, and subsequent re-establishment of the

supply.

enable the grinder to be bolted down to the bench or a stand.