Axminster Craft AC150BG Manuel d'instructions original - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions original pour {nom_de_la_catégorie} Axminster Craft AC150BG. Axminster Craft AC150BG 16 pages.

Imprimer la page

11. Hot sparks are a hazard! Never carry out grinding

operations near flammable gas or liquid.

12. Always make sure the spark guards and eye shields

are in place, that they are properly adjusted and secured.

13. Keep the spark guards close to the wheels and

re-adjust them as the wheels wear.

14. Ensure the soft washer and the flanges furnished with

the grinder are used to mount any attachments (grinding

wheels, wire brushes, buffing wheels, etc) onto the shaft.

15. Always stand to one side of the grinder when starting

the machine.

Step 1

Step 2

Specific Safety Precautions for Grinding Machines

16. Avoid awkward hand positions where a sudden slip

could cause the hands to come into contact with a grinding

wheel, wire brush etc.

17. If the wheel requires dressing, dress only the front of

the wheel, do not dress the sides.

18. Do not use any attachments that causes the machine

to vibrate. If, after changing grinding wheels or adding

attachments, the machine does vibrate, remove the

recently replaced item and change again.

19. Grinding creates heat. Do not touch the work face

of the work piece until you are sure it has cooled down

sufficiently.

AC200BG

Locate the tool rests (D) and secure them to the stone guard

housings using the bolts/washers (C) for the AC150BG and the

two butterfly knobs/washers (E) for the AC200BG.

Assembly

Continues Over...