Axminster Trade 101701 Manuel d'instructions original - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions original pour {nom_de_la_catégorie} Axminster Trade 101701. Axminster Trade 101701 18 pages.

Imprimer la page

Extension Table

Referring to Figure 7:

1. Attach the bracket (E) for the extension table to

the side of the motor housing (D) and secure

with two socket head cap screws (F).

2. Slide the shaft of the extension table (C) into

the bracket (E), positioning the table so the

opening (B) wraps around the drive drum (A).

3. Insert lock knob (G) into the threaded hole on

the side of the bracket (E) visible from the rear

of the sander.

Electrical

Grounding Instructions

This

grounded while in use to

protect the operator from electric shock.

In the event of a malfunction or breakdown,

grounding provides a path of least resistance for

electric current to reduce the risk of electric

shock.

This tool is equipped with an electric

cord having an equipment-grounding conductor

and a grounding plug.

plugged into a matching outlet that is properly

installed and grounded in accordance with all

local codes and ordinances.

Do not modify the plug provided. If it will not fit

the outlet, have the proper outlet installed by a

qualified electrician. Improper connection of the

equipment-grounding conductor can result in a

risk of electric shock.

insulation having an outer surface that is green

with or without yellow stripes, is the equipment-

grounding conductor. If repair or replacement of

the electric cord or plug is necessary, do not

connect the equipment-grounding conductor to a

live terminal.

sander

must

The plug must be

The conductor, with

Check with a qualified electrician or service

personnel if the grounding instructions are not

completely understood, or if in doubt as to

whether the tool is properly grounded. Use only

three wire extension cords that have three-prong

grounding plugs and three-pole receptacles that

accept the tool's plug.

Repair or replace a damaged or worn cord

immediately.

Figure 7