ABB VM3D Instructions d'utilisation - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation pour {nom_de_la_catégorie} ABB VM3D. ABB VM3D 4 pages. Volumetric laser scanner
24V DC
Typical VM3D 24V DC electrical installation
Standard precautions
Read VM3D user manual carefully before working with the
product. For personal and system safety and for optimum
performance, make sure you thoroughly understand the
contents before installing, using or maintaining this instrument.
All servicing of the equipment is to be
performed at factory by qualified service
personnel only.
No user/operator adjustments inside the VM3D
volumetric laser scannerr are necessary or
recommended by the manufacturer.
2 CI/VM3D-EN Rev B | VM3D Volumetric laser scanner
Ext
Com
Earth
Sig
−
Do not drop the instrument or expose the internals to water
and dirt
−
Do not open the terminal compartment in a possibly
explosive atmosphere
−
Do not install or connect with the power on
−
Use appropriate insulated lugs or ferrules with stainless
washers for connections
−
Keep the terminal compartment seal clean and lightly
lubricated with Vaseline®
−
Ensure that the terminal compartment lid, cable gland
or conduit are tight after installation
−
Only use glands that have been suitably certified by a
notified body
−
Do not install conduit so that it can drain into the VM3D
terminal compartment
−
Remove dirt from the lenses with a clean, damp cloth only
−
Aim perpendicular to liquids and avoid aiming into the
vessel fill path or at the sun
Power
Indicator
Ethernet port
Scanning
indicator