Cinegears Esprocker Instruction rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Instruction rapide pour {nom_de_la_catégorie} Cinegears Esprocker. Cinegears Esprocker 7 pages.

Setting up Two Preset points

Push the rocker switch on your esprocker controller to a lens focus distance

point, then press and hold the (A) button for three seconds to record that point.

Then move on to the next lens focus distance point, press and hold the (B)

button for three seconds to record your second lens focus distance point.

Setting up Preset

Hold the (A) and (B) button for three seconds to get the accessibility to the

esprocker function manual. F01 is the motor rotating speed option. F03 is the

manual lens calibration option. F05 is the recalibrating focus controller option.

F06 is the direction display option.

When you press and hold the (A) and (B) button on your esprocker controller for

three seconds, this gives you the accessibility to your esprocker controller's

function manual. To enter each function you can just simply press the (REC)

button. The F01 function is the speed control which makes the gear rotate on a

different range of speed. Press on the (A) or (B) button to change the number,

the larger the number goes, the faster the gear rotates. After you choose a speed

number, press the (REC) button again to let your espresso controller to record

that number.

7 Recalibrating Focus Controller

After you get to your esprocker function manual, go to the F05 function. Push

the rocker switch button to the left end then press the (REC) button. Push the

rocker switch button again to the right end then press the (REC) button again.

First, go to your esprocker function manual by pressing and holding the (A) and

(B) button for three seconds at the same time. Then, go to the F05 function by

pressing the (B) button for four times and press the (REC) button to enter that

function. Push the rocker switch button to the left end point and press the (REC)

button to record that rotation angle. Then, push the rocker switch button again to

the right end, and press the (REC) button again to record your second rotation

angle. This sets up your full camera lens traveling distance to the rocker switch

travelling distance you have set. In other words, the rotating distance of your

camera lens will lengthen while the distance of the esprocker rocker switch button

will shorten.