Cineo Edge 80 Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cineo Edge 80. Cineo Edge 80 16 pages.

Imprimer la page
Here are examples of how to accurately match camera stops to dimming levels in DMX Mode:
DMX Dimming: The Rule of 50 (0-255 scale)
Increase output 1 Stop: Add 50 DMX values (fc/lux is doubled)
Decrease output 1 Stop: Subtract 50 DMX values (fc/lux is reduced 50%)
Adjust ½ Stop = 25 DMX Values
Adjust ¼ Stop = 12 DMX Values
DMX Values
The following table lists all the 8-bit DMX values for all of the fixture presets:
Dimming
100%
255
-1 Stop
200
-2 Stops
150
-3 Stops
100
-4 Stops
050
Off
000
Note that changing the DMX values in sequential steps, as in performing a live dim to zero will add
a dimming hysteresis, or smoothing. When switching between DMX values of 5 or greater, the value
change is instantaneous, allowing the fixture to be used for dynamic lighting effects, such as strobing.

Mounting Options

All Lightblade Edge configurations ship with a 3/8" threaded Baby Pin for basic fixture mounting.
Optionally, the 160-Series and 320-Series can accommodate a twist-lock Kino mount. We also offer a
flush-mount Lightblade clip mount for mounting individual blades to walls, ceilings or set pieces. Be sure
to use safety cables whenever Lightblade Edge fixtures are mounted.
CCT
Saturation
2700
000
0%
3200
034
10%
4300
107
20%
5600
195
50%
6500
255
80%
100%
Color
000
Red
000/255
025
Yellow
050
Green
128
Cyan
204
Blue
255
Magenta
043
085
127
170
212
13