Alphasonik PRO Venum V812BT Manuel d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Alphasonik PRO Venum V812BT. Alphasonik PRO Venum V812BT 16 pages. Amplified dj speaker system

Imprimer la page

Controls

1. LED Screen: Displaying information or functions

•

MODE: Switch between USB / SD / Bluetooth / FM

*Hold down for two seconds to turn off/on | USB/SD must be plugged

•

Play / Pause

•

Stop

•

Repeat

•

Last

•

2. SD Card Slot: Use this to insert a SD Card with MP3 files

3. USB Connector: Use this to insert a USB flash drive with MP3 files

(USB works only with storage devices up to 32GB - Does not read mobile devices)

4. Volume: Use this to set the master volume

5. MP3 Volume: Use this to set the USB/SD/Bluetooth/FM volume level

6. MIC/LINE Volume: Use this to set the microphone/Line Input volume level

7. MIC/LINE Switch: Use the switch to connect the appropriate type of device

IN for Microphone and OUT for all other types of audio devices

8. MIC/LINE XLR: Use the XLR Inputs to plug in a Microphone or devices

9. Auxiliary Inputs: (Composite) RCA, Use this to plug a external audio device or

Connect any media player using a 3.5mm auxiliary cable

10. Auxiliary Volume: Use this to set the Auxiliary Input volume level

11. Line Out: Use this XLR output to connect to another active powered speaker

12. Five Band Graphic Equalizer: The equalizer will control five different

frequency bands (60, 250, 800, 2k and 8k Hz) at a maximum of 12db's.

Tuning these bands to your preference will enrich the audio playback.

13. Clipping Indicator: When you reach the limit the clipping indicator will illuminate

If you continue to increase the volume the system will continue to get louder

but sound will become distorted and can even damage the system.

14. LED Power Indicator: LED will illuminate when system is turned on.

15. LED Signal Indicator: LED will illuminate when a connection is made to

MIC/LINE input or Bluetooth.

16. Power Switch: Use this to turn the unit On/Off

17. Main supply input: Connect an IEC main power cable in order to power the

unit through electrical outlet connection

18. Voltage Switch: Capable of switching to 110 Volts or 240 Volts, switch to correct

voltage for your country. The switch is set at 110 Volts DEFAULT.

19. In the event that the protection fuse has blown, replace with the fuse with the

same exact amperage installed from the factory. If a different amperage fuse

is installed the warranty will be VOIDED.

in for option to be selected.

www.alphasonik.com

(up to 32GB)

(*cable not included)