AccuPower APLC4S3A0 Manuel d'instruction

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AccuPower APLC4S3A0. AccuPower APLC4S3A0 2 pages. Rapid charger unit for lithium-ion and lithium-polymer rechargeable battery packs with 4 cells 14.4v or 14.8v

Imprimer la page

Rapid charger unit for Lithium-ion and Lithium-polymer rechargeable battery

TECHNICAL SPECIFICATION

Input:

Output:

LED indicator:

Safety Timer: approx. 8 hours

(Timer starts automatically when the battery is connected to the charger).

OPERATION OF THE CHARGER

ATTENTION: The charging instructions of the battery manufacturer must be observed!

1. Connect the battery to the charger.

2. Make sure that the polarity of the Battery is correct.

3. Plug the power cord into an outlet.

LED Indicator:

Red :

Green :

4. When charging is complete, disconnect the power plug from the outlet and disconnect the battery from

the charger.

Do not charge any other batteries with this charger!

Note: Information and contents in this sheet are for reference purpose only. They do not constitute any warranty or representation and are subject to change without notice.

Die Informationen und Inhalte in diesem Blatt dienen nur als Referenz Zweck. Sie stellen keine Gewährleistungen oder Zusicherungen dar, und können jederzeit ohne vorherige

Ankündigung geändert werden.

Instruction Manual: Li-Ion C

INSTRUCTION MANUAL

packs with 4 cells (14.4V or 14.8V)

100 – 240V AC 50-60Hz max 0.8A

Worldwide use thanks to wide-range input

16.8V DC max 3.0A

Green:

Standby / charge completed

Red:

Battery is charging

Charging

Flashing: Error

Battery fully charged

harger

APLC4S3A0

1/2

APLC4S3A0