AccuPower IQ216 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AccuPower IQ216. AccuPower IQ216 9 pages.

For the benefit of lifetime of the smaller AAA batteries, the charging current, set by the charger, is

reduced to 500mA (max.) and is as high as the lowered current for AA batteries.

Regardless of the used number of slots, the charging current is always 500mA (max.) for AAA

batteries.

The procedure of inserting the battery to recognition of the actual state of charge works the same

as for the AA batteries. So please take a look in the above subsection.

Figure 5: Charging two AAA batteries

with 500mA (max.)

9V E-Block:

It is also possible to charge 9V blocks with the IQ216. Therefore, you need to insert one or two

blocks on the left-hand side of the LCD. Information's about the charging state you can get from

the beside LED for each slot. The upper LED belongs to the left slot and the bottom LED belongs

to the right slot. After inserting a battery, the LED starts flashing red. That shows that the battery

is charging. A stable red LED signalizes that charging has finished.

ATTENTION: Please do not use Li-Ion 9V batteries. Please pay attention to charge the right

battery types only.

Discharge function:

User Manual

Figure 6: Belonging of each LED to its charging slot

5/9

Charging four AAA betteries

with 500mA (max.)

English

Finished charging

a AAA battery