ARC LYCT-505 Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} ARC LYCT-505. ARC LYCT-505 4 pages. Wireless remote control

Imprimer la page

aring:

Hand held remote control can memorize unlimited receivers into the 16 channels.

Pairing using LEARNING MODE:

1. First choose the desired receiver(s) that you wish to control.

2. Press the 'Learn' button once (LED will flash), this will now enter learning mode.

3. On the remote control press the 'ON' button intended to be paired; the load will flash twice to

confirm that the remote control is now paired.

＊ To pair two or more receivers as a group, during the learning mode press the 'Group ON' button

instead.

NOTE: Learning mode lasts for 12 seconds; if no signal is given to the receiver then it will

automatically exit learning mode without pairing the device.

To exit learning mode manually, simply press the 'Learn' button again.

！If, during learning mode the load does not flash to confirm, this means that the receiver's memory

is FULL and no further remote control may be paired unless one of the existing remote control is

first unpaired (see below).

nparing:

Removing single device:

1. With the receiver that you intent to un-pair press the 'Learn' button once (LED will flash), this

will now enter learning mode.

2. On the remote control press the 'OFF' button intended to be unpaired; the load will flash twice to

confirm that the remote control is now unpaired.

＊ To un- paired receiver(s) from a group, during the learning mode press the 'Group OFF' button

instead.

Version 2.