ACCUR8 YD8230A-4UK Manuel de l'utilisateur - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ACCUR8 YD8230A-4UK. ACCUR8 YD8230A-4UK 7 pages. Weather forecast station
Imprimer la page
• Do not expose this device to high temperatures and protect it from water and high humidity.
• Do not immerse the unit in water.
• Protect the device from severe shocks or excessive vibrations.
• For this device, only use accessories and spare parts that comply with the technical information.
• Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of
batteries at full capacity. Do not use batteries from different brands or with different capacities. Remove the
batteries from the unit if it has not been used for a long time.
• Rechargeable batteries are not recommended.
Risk of voltage damage
The manufacturer is not liable for voltage damage due to improperly inserted batteries or through the use of
an improper power adaptor.
3.
Functions
1. Calendar
2. Radio-controlled time from the DCF signal in Germany (for many UK locations; the time needs to be set
manually)
3. Indoor temperature/humidity and temperature trend
4. Wireless outdoor temperature/humidity and outdoor temperature trend
5. °C/°F selectable
6. Alarm with snooze function
7. Weather forecast indicated by six icons: Sunny, Partly sunny, Cloudy, Rainy, Stormy, Snowy
8. Low battery indicator for outdoor sensor and station
9. Colour display
10. High/Low daily records
11. Sensor signal strength
12. Sunrise and sunset time display
13. Moon phase
14. Eight languages for Day of Week display (Germany, France, Spain, Italy, Netherlands, Denmark, Russia,
English)
4.
Controls
1. SNZ/LIGHT button
2. MODE button
3. ALARM button
4. UP button
5. DOWN button
5.
Initial Setup
1. Remove battery cover and insert three AAA batteries (batteries not included). Once the batteries are
inserted, you have 3 minutes to complete steps 2 and 3. Don't worry if you run out of time. It's easy to start
over!
2. Remove back cover of the remote transmitter.
3. Install two AAA batteries into transmitter.
4. Once the batteries are inserted into the remote transmitter, the red light will turn on. Once the red light
disappears, the temperature reading of that transmitter will be displayed on the screen.
1