Cino Fuzzyscan Manuel de démarrage rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cino Fuzzyscan. Cino Fuzzyscan 17 pages. Bluetooth cordless scanner
Également pour Cino Fuzzyscan : Manuel de démarrage rapide (17 pages), Manuel de démarrage rapide (17 pages), Manuel de démarrage rapide (15 pages), Manuel de démarrage rapide (17 pages), Manuel de référence rapide (12 pages), Manuel de démarrage rapide (17 pages)

Install Your FuzzyScan

Adjust Reading Angle

The readability may be impacted by the specular reflection caused by the

perpendicular reading angle. To get the most optimal reading performance, it

is recommended to install the scanner at an approximate 15° angle to the

perpendicular line of the target barcode. However, the reading angle and

distance may vary depending on the size and printing quality of barcodes.

Mount Your FuzzyScan

There are two M3 mounting holes on the bottom of the chassis. Please follow

below procedures to mount your scanner.

Prepare two appropriate M3 screws (minimal 4mm in depth) and decide

your desired mounting location. Then adjust the two screws to

accommodate 27mm center width.

Optimize the mounting position by adjusting reading angle and distance.

Ensure the illumination envelop is not blocked by any external object.

Use the Intelli Button to verify the actual reading rate. If the reading rate

is not good enough, please adjust the reading angle and distance to get

the optimum readability.

Front-view

Side-view