Cino FuzzyScan F680BT Manuel de démarrage rapide - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cino FuzzyScan F680BT. Cino FuzzyScan F680BT 17 pages. Cordless scanner
Également pour Cino FuzzyScan F680BT : Manuel de démarrage rapide (17 pages)
Imprimer la page
Preparations before Using
Install the Battery
Charge the Battery via Power Supply Unit
Charge the Battery via USB 3.0 Port
Ensure the battery contacts of the battery pack
are facing the charging contacts inside
the battery cavity.
Slide the battery pack into the battery cavity until
hearing a click sound. Press the trigger to power
on. The scanner will give 4 beeps when the
battery pack is installed properly and if the
battery pack still has power.
Secure the end cap with the screw provided.
Choose the right plug and slot it into the power
supply unit cavity until a "click" is heard. Then
plug the power supply unit into the wall outlet.
Plug the DC power cord of power supply unit
into the DC Jack of the cradle. The smart cradle
will emit four beeps and the central indicator
blinks blue once and side indicators lights red.
If you use the charging cradle, the central
indicator lights blue.
Place the scanner on the cradle. The status
indicator of scanner turns steady red if the
battery is not fully charged. When the battery is
fully charged, the status indicator will be steady
green.
Please charge the new battery pack for 8 hours
before its first use.
If USB 3.0 is available in your host device, both
battery charging and regular operation can be
supported by the USB bus power without using
external power supply.
If only USB 2.0 is available in your host device,
we recommend using external power supply as
power source, because the power supplied from
USB 2.0 is not enough to support both battery
charging and regular operation simultaneously. .
2