Arc Euro Trade SC3 Manuel de démontage et de remontage - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel de démontage et de remontage pour {nom_de_la_catégorie} Arc Euro Trade SC3. Arc Euro Trade SC3 17 pages.
Imprimer la page133. Fit end cover and front panel.
136. Fit the leadscrew bracket with the 1/2 nut locked for position.
138. Temporarily fit the cross slide feed screw and bracket and
check for backlash.
139. To reduce backlash, machine the rear face of the bracket.
140. To increase backlash, machine a little from the recess. Remove the feed screw and bracket and put to one side.
141. Place cross slide on saddle
and check for clearance in
corners of dovetail.
145. View gib strip to check if
it's sitting correctly. If OK,
disassemble.
134. Remove right hand leadscrew bracket
and fit screw guard.
142. Modify gib screws or replace
with cone point screws.
146. Fit top slide base retaining plate.
135. Pinch up the guard screws.
137. Wind the carriage up and down the bed to check guard clears
and tighten the screws.
143. Assemble cross slide and gib strip.
147. Drop in gib strip and lubricate all ways.
- 14 -
144. Fit adjusting screws lightly.