ARC Technology LMDT-609 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ARC Technology LMDT-609. ARC Technology LMDT-609 9 pages. Indoor motion sensor

Imprimer la page

Pairing using LEARNING MODE:

1. First choose the desired receiver(s) that you wish to control.

2. On the receiver press the 'Learn' button once (LED will flash), this will now enter learning

mode.

3. On motion detector, slide the button from "DEL" to "SET" position.

4. The load will flash twice to confirm the motion detector is now paired.

！ Make sure the code is learnt properly before you slide the button to any position, this may

cause the code being deleted accidently.

NOTE: Learning mode lasts for 12 seconds; if no signal is given to the receiver then it will

automatically exit learning mode without pairing the device.

To exit learning mode manually, simply press the 'Learn' button again.

！If, during learning mode the load does not flash to confirm, this means the receiver's memory is

FULL and no further remote control / motion detector may be paired unless one of the existing

remote control / motion detector is first unpaired (see below).

n-pairing:

1. First choose the desired receiver(s) that you wish to control.

2. On the receiver press the 'Learn' button once (LED will flash), this will now enter learning

mode.

Version 1.