Arc-Zone A-PT-051-PRO Manuel d'utilisation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Arc-Zone A-PT-051-PRO. Arc-Zone A-PT-051-PRO 17 pages. Benchtop welding positioner
Également pour Arc-Zone A-PT-051-PRO : Manuel d'utilisation (13 pages)
4. Installation / Operation:
t
4. INSTALLATION / OPERATION
1. Power cord:
Connect power to 100V~240VAC single phase power.
Note:Standard power plug:NEMA 5-15P. Adapters are provided for region with different
power socket.
NEMA-5-15P
2. Grounding stud:
Connect the grounding cable to system's grounding stud.
Warning:Unconnected grounding can cause system damage.
3. Tilt Release / Locking handle:
Turn clockwise to tighten/lock, turn counterclockwise to release.
Warning:Do not turn the locking handle while loads are present on the faceplate.
4. Power switch (SW1):
I = On,O = Off
5. Forward / Reverse switch (SW2):
Reverse (
Reverse
6. Stop:
Press the Stop button to pause all motion and disable all control.
Rotate the Stop button clockwise to reset.
7. Speed Adjustment Knob (VR1):
Rotate clockwise to increase speed, counter clockwise to decrease speed.
8. Foot switch (F.S):
Steps onto the foot switch to start the faceplate rotation. Release the foot switch to stop the
faceplate rotation.
9. Fuse holder (FS1):
Overload protection. Can be replaced by turning the knob clockwise to open the fuse cover.
Copyright©2020 Arc-Zone.com®, Inc. All Rights Reserved
) / Forward (
Forward
European Adapter
)
2091 Las Palmas Drive, Ste. F
5
Carlsbad, CA 92011-1551 - USA
Tel. 760-931-1500 sales@arc-zone.com
Australian Adapter
Arc-Zone.com, Inc.
5 / 8