Arc-Zone A-PT-051-PRO Manuel d'utilisation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Arc-Zone A-PT-051-PRO. Arc-Zone A-PT-051-PRO 17 pages. Benchtop welding positioner
Également pour Arc-Zone A-PT-051-PRO : Manuel d'utilisation (13 pages)
Imprimer la page
4. Installation / Operation:
t
4. INSTALLATION / OPERATION
1. Power cord：
Connect power to 100V~240VAC single phase power.
Note：Standard power plug：NEMA 5-15P. Adapters are provided for region with different
power socket.
NEMA-5-15P
2. Grounding stud：
Connect the grounding cable to system's grounding stud.
Warning：Unconnected grounding can cause system damage.
3. Tilt Release / Locking handle：
Turn clockwise to tighten/lock, turn counterclockwise to release.
Warning：Do not turn the locking handle while loads are present on the faceplate.
4. Power switch (SW1)：
I = On，O = Off
5. Forward / Reverse switch (SW2)：
Reverse (
Reverse
6. Stop：
Press the Stop button to pause all motion and disable all control.
Rotate the Stop button clockwise to reset.
7. Speed Adjustment Knob (VR1)：
Rotate clockwise to increase speed, counter clockwise to decrease speed.
8. Foot switch (F.S)：
Steps onto the foot switch to start the faceplate rotation. Release the foot switch to stop the
faceplate rotation.
9. Fuse holder (FS1)：
Overload protection. Can be replaced by turning the knob clockwise to open the fuse cover.
Copyright©2020 Arc-Zone.com®, Inc. All Rights Reserved
) / Forward (
Forward
European Adapter
)
2091 Las Palmas Drive, Ste. F
5
Carlsbad, CA 92011-1551 - USA
Tel. 760-931-1500 [email protected]
Australian Adapter
Arc-Zone.com, Inc.
5 / 8