Arcam DiVA A85 Manuel - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Arcam DiVA A85. Arcam DiVA A85 14 pages.
Imprimer la page
Installation: P85 power amplifer
VOLTAGE
SELECT
POWER INLET
Connecting to power, loudspeakers and
other equipment
Follow the installation instructions for the integrated amplifi er
on pages 4–6.
AUDIO IN
amplifi er or the
MONO LINK
two mono loudspeaker outputs from a single input. Pull out the
link supplied and use it to connect the
sockets together. Using one power amplifi er per loudspeaker
will enable you to bi-amplify bi-wireable loudspeakers.
This is particularly benefi cial for top quality stereo installations
with a separate pre-amplifi er, or where amplifi ers are provided
for the left, centre and right channel loudspeakers in a fi ve
speaker Dolby Pro Logic or Dolby Digital system.
Contact your Arcam dealer for more information.
"Daisy chaining" – The power amplifi er can be connected to
further power amplifi ers to drive more speakers (e.g. those in
other rooms or tri-amplifi ed speakers, etc).
Connect the extra power amplifi er inputs to the
sockets on the power amplifi er, left to left, right to right.
A85/P85
10
+
–
+
R/CH1
SP2
4 – 16 OHMS
TRIG
OUT
SP1
REMOTE
IN
+
–
+
R/CH1
– Connect this input to the output sockets of your pre-
sockets of an integrated amplifi er.
PRE OUT
– The power amplifi er can be adapted to provide
–
L/CH2
AUDIO
L
R
–
L/CH2
IN
OUT
Remote switching
By making a connection from the
power amplifi er to the
amplifi er, you can use the A85 to switch the power amplifi er on
and off. If confi gured in this way, the front panel
of the A85 (or the
switches both amplifi ers on and off together. This facility allows
you to conceal the power amplifi er yet still control it.
The connecting cable required is a 3.5mm to 3.5mm jack lead
and
L
R AUDIO OUT
(stereo or mono) and it is possible to connect several power
amplifi ers to an A85 by 'daisy chaining' from
P85 into the
Three channel option
The power amplifi er can be upgraded from stereo to three
channels by adding a Third Channel Module: in this case, the
model is designated P85/3.
The module offers extra loudspeaker terminals together with
a third set of
the P85 into a 3 x 85W (RMS per channel into 8Ω) amplifi er
AUDIO OUT
suitable for Home Cinema or multi-channel audio use.
Contact your Arcam dealer for further details.
+
CTR/CH3
SP2
LINK
4 – 16 OHMS
SP1
+
CTR/CH3
Optional Third Channel Module
– provides a third 85W channel
suitable for Home Cinema or
multi-channel audio use.
REMOTE IN
socket of the A85 integrated
TRIG OUT
button on the remote control)
Power/Standby
of the next.
REMOTE IN
and
phono sockets and converts
AUDIO IN
OUT
–
CTR/CH3
AUDIO
IN
OUT
–
socket of the P85
button
POWER
of one
TRIG OUT