AXTON A580DSP Manuel d'installation et d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AXTON A580DSP. AXTON A580DSP 15 pages. 4-channel smart digital amplifier

Imprimer la page

Channel Control

In this menu you can make the following

settings for each individual channel: sound

level, mute switch, and phase.

The sound level settings are made in

the field above and under the respective

speaker icons. The standard value for the

speakers is +5 dB, and for the subwoofer

0 dB.

In the lower area of the menu in the top line

are the icons for setting the phase. From

left to right: Front left, Front right, Rear left,

Rear right, Subwoofer.

In the bottom line are the icons for setting

the mute switch. From left to right: Front

left, Front right, Rear left, Rear right, Sub-

woofer.

When you have done the preferences,

go back to the main menu, and touch the

„Save to Amplifier" button

to transfer

the preferences to the amplifier. During

the saving process do not switch off the

amplifier as this may lead to malfunction

and/or damage. You can also save the

preferences on your smartphone. To do

this, press „Save on Phone"

, and

enter the desired filename.

– 12 –

Dynamic Bass

The „Bass" slider offers a great opportunity

to increase the bass level without overloa-

ding the speakers.

Level at "0" = no Dynamic Bass Function

active

Level from "1" to "20" = the higher the value

the higher the bass increasing. Simulta-

neously a strong subsonic filter is enabled

to protect the speakers from deepest bass

frequencies.

Dynamic Bass: The

„Bass" slider offers the

without over-

bass level

loading the speakers.

Load

Shows a list of files saved on the smartphone. Type in the desired setup to load.

If you now want to save the loaded setup permanently on the amp, press the „Save to

Amplifier" button

Save to Phone

You can save the preferences on your smartphone. To do this, press the „Save on Phone"

button, enter the desired filename, and confirm with „OK".

Save to Amplifier

Touch the „Save to Amplifier" button to transfer the preferences to the amplifier. Select

one of the five presets. During the saving process do not switch off the amplifier as this

may lead to malfunction and/or damage.

– 13 –