Cirago NUS1000 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cirago NUS1000. Cirago NUS1000 20 pages.

2. Hardware & Installation

The Front Panel

Display

Power :

Indicates the power is on

LAN :

ON - network connected to switch / hub

Blink - indicates live network activity.

USB 1-4 :

On when a USB device plugged into the corresponding ports. They also

act as status indicators:

Power Up > USB 3 ON (12 sec) > USB 4 ON (10 sec) > OFF (15 sec) >

USB 1-4 Blink twice

Buttons

Reset:

Protected button to reset the system to default parameters in order to

recover the unit, activate only in the power up diagnostic stage for the 10

seconds the USB 4 LED is on. If the reset is accepted, all USB LEDs will

flash for a second, then you can release the button and the system will

boot up with factory default settings.

Eject:

In order to safely unplug the USB storage, hold down the Eject button for

1 second and wait until all USB LEDs are off and then unplug the USB

device. Alternatively, you can eject a connected USB storage through

the web interface. In the TOOLS menu, select "Unplug" and then select

the device you wish to unplug.

After the USB device is removed, you can push this button again (1 sec)

to resume the operation of the remaining connected USB devices.