Arcam SOLO MINI Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Arcam SOLO MINI. Arcam SOLO MINI 18 pages. Music system
Également pour Arcam SOLO MINI : Brochure (2 pages), Manuel (20 pages)

Arcam SOLO MINI Manuel
top panel/
front panel
Skip back/forward
To skip tracks on a CD, press
skipping back, the first button press takes
you to the beginning of the current track.
Pressing the button again takes you to the
start of the previous track.
When the source is Radio (DAB, FM or
AM), the buttons cycle through station
presets.
When the System menu is active, the
buttons are also used to step through
option settings (see page 16).
Source
Press the
button to cycle
SOURCE
through the available signal sources.
In Standby mode, pressing the
button switches Solo Mini on.
SOURCE
Front panel display
This is a vacuum fluorescent
display with variable brightness.
CD input slot
Gently insert a CD (label-side up) into
this slot and allow the disc to be drawn
in by motorised rollers. If 'CD AutoPlay'
is enabled, the CD plays immediately (see
page 16.)
D
o not nsert
stanDarD sizeD DisCs
/
(Stop/Eject)
<
1
Press the
<
/
1
button once to stop a disc
playing. Press again to eject a stopped disc.
When playing a CD, pressing and holding
<
/
1
also ejects a disc.
/
or
0
. When
SOURCE
CD
Track 7
Headphone output
This 3.5mm stereo jack socket
accepts headphones with an
impedance between 32
600
Ω
. Sound to the speakers
is muted when headphones
are used.
80
CD
-
mm mini
s or any non
.
Power
Note that the primary power-switch for Solo Mini is on the rear of the unit. If the
power light is not illuminated at all, check that the unit is receiving mains power and the
rear power switch is 'On'.
Press the
2
button to switch Solo Mini between 'On mode' and 'Standby mode'.
When Solo Mini is in standby mode, the light next to the power button on the top panel
2
glows red. Pressing
when the unit is in standby mode will cause the unit to switch on
and the power button light turns blue.
Play/Pause
4
;
Press the
/
button to start playing a
track, pause a playing track, or resume
playing a paused track.
Mute
Use this button to mute the volume. If Solo Mini is
muted, pressing the
MUTE
or changing the volume will unmute it.
Shuffle
Vol:35
1:45
IN
Line-level input
This is a stereo analogue
input, connected via a stereo
and
3.5mm jack plug. It is suitable
Ω
for audio sources such as
a portable tape player, MP3
player or games console.
5
button for a second time
Volume –/+
Use these buttons to decrease (
) or
increase (
) the volume. The current
+
volume setting is shown on the front
panel display.
USB input
The USB socket is suitable for an MP3
player or for playing files contained on
a USB memory device.