Axus AXP10 Manuel du propriétaire - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Axus AXP10. Axus AXP10 4 pages. I.panel control and extension ports
Imprimer la pageII Preparation for Performance
● Using AC/DC Power Supply Adaptor
The AC/DC power supply adaptor must be the one designated for the instrument. Please connect one
side to the power supply socket on the real-panel and the other to the city-power network. (Please
notice that the input voltage should be the same as that of the power network.)
● Audio Output/Headphone Connection ( Headphone is not included)
◆ Audio Output: First turn off the power supply of the electronic keyboard and external sound
equipment, and then insert one end of the audio cable into the PHONES/OUTPUT interface for
audio output on the back of the electronic keyboard, and insert the other end into the audio input
interface of the sound equipment.
◆ Headphone: The speakers will be automatically turned off when your headphones are
connected to PHONES/OUTPUT interface. You can thereby play the keyboard without disturbing
others.
Attention: To prevent potential hearing losses, keep your headphone volume in a moderate.
● Microphone input (Mic isn't included)
Connect the microphone to the microphone jack and you can enjoy singing along with keyboard.
● Audio input
The electronic keyboard has the stereo audio input function, and audio signals of mobile phones,
MP3 players, computers and the like can be input into the electronic keyboard system to be played.
At fist, turn off the power supply of the electronic keyboard, insert the other end into the AUDIO
INPUT interface on the back of the electronic keyboard, and then turn on the power supply of the
electronic keyboard.
● Music Player
Insert the udisk plug into the UDISK interface on the back of the electronic keyboard and then you
can play the MP3 music in the udisk, the electronic keyboard supports the maximum 32G memory
and common MP3-format files.
1.Press volume control button of the music player to adjust to volume.
2.Press【 】 to play the previous,【 】 to play the next,【 】 to play/suspend, 【 】 to stop, and
【
】to enter order, random and single playing modes.
3.Press 【Effect】button to adjust the sound effect modes.
※ Mp3 playing first: when MP3 music is playing, the "USB" will be showed on the display and the
"Guide/Demo/ Rhythm" functions cannot be used. If the
"Guide/Demo/ Rhythm" was playing before playing "mp3"， it would be stopped automatically when
the MP3 music starts.
III Basic Method of Performance
Press【 POWER】 button and the digital display shows"120", the system is in the
standby state. Press it once more, the button will rise, and the instrument is power off.
● Master Volume Adjustment
Press 【MASTER VOL+】 or 【MASTER VOL-】 button to turn up or turn down the
master volume. The master volume is to recover to the default preset volume when
pressing【MASTER VOL+】 and 【MASTER VOL-】at the same time.
● Accom Volume Adjustment
Press 【 ACCOM VOL +】 or 【 ACCOM VOL -】 button to turn up or turn down the
Accom Volume. The Accom volume is to recover to the default preset value when the
【ACCOM VOL +】 and【ACCOM VOL -】 are pressed at the same time.
● Selection of Timbres
There are 255 kinds of timbre reserved in the unit, from "000" to "254" freely, the preset
timbre is "000". When the power supply is turned on, the timbre selection function is
enabled automatically. The target timbre can be picked out by pressing the number
buttons or pressing button 【+】or 【-】. While the number buttons are in the state of
other control, press【TIMBRE】button, all number buttons and 【+】/【-】are in effect
of timbre selection.
● Percussions
There are 8 panel percussions and 61 keyboard percussions.
Press panel percussion buttons and the related percussion can be reached.
Press【 KEYBOARD PERCUSSION】 button, the keyboard becomes percussion
keyboard transitorily, and a keystroke corresponds to a type of percussion. Press the
【KEYBOARD PERCUSSION】again to disable the keyboard percussion function and
the keyboard turns normal.
● Demonstration Songs
The instrument provides 24 demonstration songs from code 00 to 23. Press the
【DEMO SONG】 button to playback all of demonstration songs in sequence. Pressing
the 【 DEMO SONG】 button again while it's playing a song will skip the current
demonstration and jump to the next song. Press the【 START/STOP】 button again to
stop the demonstration songs. To switch to another song, press the numbers or 【+】/
【-】 on the numeric pads. The chosen song will be played in a single cycle.
During playback, another demonstration song can be selected by pressing the corresponding number
via number buttons or pressing "+" or "-" and then the system play the present song repeatedly.
IV. Auto-Rhythm
● Rhythm Selection
There are 255 kinds of rhythm reserved in the unit, from "000" to "254" to select freely, the preset
rhythm is "000". The target rhythm can be picked out by pressing the number buttons or pressing
button 【+】or 【-】.While the number buttons are in the state of other control, press【Rhythm】
button, all number buttons and 【+】/【-】are in effect of rhythm selection.
● Rhythm Control
1.Start Rhythm
Press the 【START/STOP】button to start the accompaniment rhythm.
Press【 SYNC】 button, then to press any note of the 19 keys on the left part of the keyboard, the
rhythm accompaniment will be started synchronously.
2.Fill In
In the state of the rhythm, press the 【 FILL IN】 button, a piece of intermezzo can be filled in
automatically.
3.Stop the Accompaniment
Press the 【START/STOP】button, the accompaniment rhythm quits at once.
● Tempo Adjustment
The preset tempo is 255 beats/min. The tempo of the rhythm can be quickened or slowed by pressing
the 【TEMPO+】or 【TEMPO-】button . Apply the both at the same time, the tempo turns back to
the present one.