Axus AXK4 Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Axus AXK4. Axus AXK4 15 pages.

Imprimer la page

OPERATION GUIDE

2. Once the coaching mode has been chosen, press the CLICK button. The metronome beats will start and you can

play along on the drum for practice.

3. After four preliminary beats, the display will show:

(too slow)

4. Once you have completed the coaching mode a score will be displayed from 0-100 evaluating the accuracy of

the exercise.

C-1 mode: Press the SELECT button to enter the parameter setting interface. You can adjust the number of practice

sessions as required (01-32). The number of sessions to practice determines the length of this exercise.

C-2 mode: Press the SELECT button to enter the parameter setting interface. You can adjust the number of practice

sessions as required (04-32). The number of sessions to practice determines the length of this exercise.

C-3 mode: Press the SELECT button to enter the parameter setting interface. You can adjust the rate at which the BPM

changes (01-09 BPM).

5. Press the CLICK button again to end the coach mode.

DEMO SONGS

1. Press the SONG button to enter the demo mode, there are 30 demos to choose from. The screen will display

the current demo song number (01-30).

2. Press the <

> button to start playing the demo songs. To stop playing press the <

3. Turn the parameter wheel or press the -/+ buttons to select a demo song.

4. Press the SELECT button in song mode to jump to the song parameter setting interface.

You can turn the drum sound on or off by turning the parameter wheel (the drum sound is on by default).

5. Press the SELECT button to confirm and exit the parameter interface.

DRUM PARAMETERS

Press the KIT button and the screen will display 01 (drum kit number). Press SELECT to enter the drum parameter

adjustment mode.

2. Tap the drum you want to adjust, then press the -/+ buttons to select the parameter for adjustment.

Sensitivity S (01-06).

Repeated trigger r (01-32).

3. Change the parameters by rotating the parameter wheel and long press the - button to save. The screen with display

SAV to indicate the parameter adjustment has been saved successfully.

4. To restore the drum parameters back to factory settings long press the + button until the screen displays RES.

PLEASE NOTE: The parameters for the 3 tom drums can not be set individually.

RECORDING FUNCTION

1. Press the < REC > button when the indicator light is in the "KIT" and "CLICK" states and the screen displays

the words "REC" in the flashing state, entering the recording preparation state.

2. Tap any drum and the metronome sounds. At this time, the screen displays "---" in the flashing state and starts

recording.

3. Press the < REC > key or < PLAY > key again, the recording stops and "A-1" is displayed on the screen.

4. Press <

> to start playing the current recording and press again to stop playback.

5. If you enter the recording preparation state again without any drumming, the "A-1" recorded last time is played back.

SAVE / RESET

1. To save parameters long press the <-> button and the screen will display SAV.

2. To reset parameters long press the <+> button and the screen will display RES res.

USBMIDI

1. To use the drum kits MIDI function plug a USB-B data cable (not included with this drum kit) into the control unit

and connect to PC/Smartphone.

(good)

Trigger threshold t (01 - 32).

Drum Force V (01-03).

(too fast)

> button again.

Crosstalk threshold c (01 -32).

Drum volume L (00 - 31).