Circe Cycles Helios Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Circe Cycles Helios. Circe Cycles Helios 12 pages. Separable tandem
Également pour Circe Cycles Helios : Manuel d'assemblage (8 pages), Manuel du propriétaire (15 pages)
Imprimer la page
Step 3.
Lay the bike down and remove the following:
- stoker seatpost (Q/R)
- stoker bars from the captain seatpost (5mm)
- handlebars from the stem (4 or 5mm)
- steerer extender from the frame (Q/R)
- timing chain by releasing the joining link(Long nose
pliers)
To separate the handlebars from the front section the
front brake cable needs to be removed from the brake
lever.
Step 5.
Place the front frame section and the rear triangle
into the case as shown. Foam packing should be fitted
between all contact points to prevent damage.
Step 4.
Using a 6mm allen key undo the coupling bolts so that
the stoker cross bar can be removed. Then undo the
pinch bolts on the drain pipe, also with a 6mm allen
key. The pinch bolts don't need to be removed
completely, but should be sufficiently undone so that
they allow the drainpipe and frame sections to slide
apart with a moderate twisting/pulling force.
Page 4