Circe Cycles Helios Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Circe Cycles Helios. Circe Cycles Helios 12 pages. Separable tandem
Également pour Circe Cycles Helios : Manuel d'assemblage (8 pages), Manuel du propriétaire (15 pages)

Circe Cycles Helios Manuel de l'utilisateur

2.2 Two case system using standard suitcases

The two case system requires two suitcases of sufficient size and rigidity to carry the two separate parts of the Helios tandem.
This system offers the advantages of using readily available suitcases and the reduction in weight and volume of each pack-
age making it easier to carry, and utilise individual baggage allowances.
Restrictions
- Requires two suitcases of min. internal dimensions of 77 x 50 x 25 cm (30" x 20" x 10")
- Mudguards need to be removed
- Only certain pannier racks will fit in the case, racks need to be removed for packing.
- Ursus Jumbo stand has to be removed (Pletscher twin leg stand can be left on)
- Some bar configurations may be problematic.
Necessary tools
- 5 and 6 mm allen key
- Pedal spanner
- Long nose pliers
Packing
Follow Steps 1 - 4 for packing the one case system.
Step 6.
Depneding on the case, remove the forks from the front
section by first loosening the clamp bolt using a 5 mm allen
key. Then undo the top cap bolt completely, again using a 5
mm allen key. The forks should now slide out of the headtube.
N.B. Slide all the headset parts back on to the fork as shown so
that they don't get lost or damaged.
Step 5.
Place the rear end of the tandem, rear wheel, captain
handlebar and captain seatpost into the case.
Positioning may vary depending on the case. Ensure
all parts are sufficently protected with foam packing.
N.B. Depending on the case the rear tyre may need to
be deflated.
Page 8