Arcan ASC8013DLX Manuel de démarrage rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Arcan ASC8013DLX. Arcan ASC8013DLX 4 pages. Service cart with locking top & drawers

Imprimer la page

ASSEmBlY INSTRUcTIONS

Do not fully tighten fasteners

NOTE

until prompted.

Step 1: Assembly preparation.

Clear table top and set Locking Drawer Assembly

on table top, with lid facing up. Position the Locking

Drawer Assembly so that one end hangs off of the

table enough to allow the chrome legs to go through

the square holes. Insert one set of chrome legs

through the overhanging holes as shown in Figure 1.

Do not bolt legs to top.

Step 2: Connecting legs and side

accessory to drawer assembly

Choose one of the side accessories (Pry Bar Holder

or Side Work Bench - Figure 2 shows Pry Bar Holder)

for attachment to the overhanging end of the service

cart. Align the outermost bolt holes in the accessory

with the bolt holes in the end of the cart and with

the uppermost holes the chrome legs. Position a

washer and insert a 10mm bolt through the washer,

bolt holes, and legs as shown. Secure bolts with a

flat washer, lock washer, and nut on inside of Lock-

ing Drawer Assembly. Tighten bolts until parts fit

together firmly.

Repeat steps 1 and 2 for other end of cart,

using remaining side accessory.

ASC8013DLX: Parts Breakdown & Operating Manual

Locking

Drawer Assy.

Table

Chrome

Legs

Table

Locking Top

Chrome

Legs

Locking Top

Locking

Drawer Assy.

Pry Bar

Holder

10mm

Bolt

3.2

033109