ARCBRO Thunder X-PRO Soutien aux services - Page 5

Parcourez en ligne ou téléchargez le pdf Soutien aux services pour {nom_de_la_catégorie} ARCBRO Thunder X-PRO. ARCBRO Thunder X-PRO 7 pages. How to set flame cutting - debugging process

Imprimer la page

Service Support Spirit

Load G code or graphics→Press the green【start】button→Ignition with a flame igniter→

Waiting for Preheat→See redness steel reaches the molten state;→Press 【Cut】 key then Start flame

cutting;

Repeatedly adjust the intensity of the flame, the pressure of cutting oxygen, the cutting speed,

and the height of the cutting to optimize the cutting effect.



Step 3- Start formal flame cutting;

Load G code or graphics→Press the green【start】button→Ignition with a flame igniter→

Waiting for Preheat→See redness steel reaches the molten state;→Press 【Cut】 key then Start flame

cutting;

Note：If the preheat time is not modified, the system will automatically remember the last preheat

time, the next time the cutting machine runs the last preheat time and then automatically pierce-

cutting; However, it is also possible to press the 【Cut】button according to the preheat condition;

Then perforation-cutting

In the cutting process, you can adjust the cutting

speed according to home and end; adjust the

capacitance value of the CHC---control the height of

the torch

Unique Solution

CHC

Adjust the

capacitance

value