ARCCAPTAIN CUT50 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ARCCAPTAIN CUT50. ARCCAPTAIN CUT50 20 pages. Plasma cutter 50a

Imprimer la page

2) Configuration

Name

Cutting machine

Cutting torch

Earth clamp

Operator's manual

Gas hose

Conversion adapter

Shoulder Strap

2.4 Functions and characteristics

This is a digital plasma cutting machine with perfect function, high performance and

advanced technology. CUT50 is an ultra-portable plasma cutting system suitable for a

variety of application requirements. It can be used in handle cutting and robot cutting as

well. CUT50 can cut conductive metal, such as low carbon steel, stainless steel and

aluminum. The cutting thickness can reach up to 3/4'' (20 mm)，quality cutting thickness

can reach up to 1/2'' (10mm), perforating thickness can reach up to 1/3'' (8 mm).

The forward-looking design concept of this machine and the application of a large number

of advanced and mature technologies can protect user's investment to the greatest

extent.

Advanced digital control mode



Plasma cutting machine CUT50 adopts international leading MCU intelligent digital control

technology, and all its major parts are performed through software. It is a digital control

plasma cutting machine, improved a lot in its function and performance when compared

with the traditional plasma cutting machine.

Advanced inverter technology



With PWM technology and high power component IGBT, it inverts the DC voltage, which

is rectified from 50Hz/60Hz input AC voltage, to 30K~100KHz AC high voltage. Then the

voltage is dropped and rectified to output the high power DC power supply for cutting. The

machine adopts switching power supply inverter technology, greatly reducing the volume

and weight of the plasma cutter, and obviously enhancing the conversion efficiency.

Switching frequency is beyond audiorange, which almost eliminates the noise pollution.

Good consistency and stable performance



Digital Welder Expert, Know You More

Configuration of CUT50

Specification

CUT50

PT-31 16ft (5m)

200A-16mm

（9ft/ 3m）DKJ 35-50

Operator's manual of CUT50

5*8mm Orange（9ft/ 3m）

American adapter plug

0.1*4.3ft (30mm*1500mm), Black

Quantity

(pcs)

https://www.arccaptain.com