Axxera AS65 Manuel d'installation et d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Axxera AS65. Axxera AS65 8 pages. As series

Imprimer la page

1. Determine where the speakers will

be mounted. Make sure the area

is large enough for the speaker

to mount evenly. Also ensure the

mounting location is deep enough for

the speaker to fit.

2. Refer to the specification chart to

determine the proper diameter hole

to cut for your speaker model.

3. If needed, use the grille as a template

to mark the locations for the

mounting screws. Drill the holes with

a 3/32" bit.

4. Fit the speaker to the hole cut-out.

Mount the speaker using the

supplied screws. If the speaker grill

is to be used, insert 4 screws into

the grill holes and then mount the

speaker.

INSTALLATION

Mounting