Axxeron HESCH HE 5711 Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Axxeron HESCH HE 5711. Axxeron HESCH HE 5711 19 pages. Solenoid valve controller

Imprimer la page

Explosion Prevention! (for ATEX approved devices only!)

This device (the version with the Makrolon housing) is suitable for

operation in explosion Zone 22 with the lid closed (where an explosive

atmosphere may arise due to electrically conductive dusts).

Prior to opening the device, one must ensure that there are no explosive

ambient conditions, such as dust formation. The special regulations

governing operation in an Ex-area must be observed.

Fuse failure!

First determine the causes for the failure and remove them.

Only use fuses which have the same specification as the original type as a

replacement.

Repaired fuses or short circuiting are not permissible.

Troubleshooting!

At the beginning of troubleshooting, all possible sources of faults on

additional devices or supply lines (measuring lines, wiring, downstream

devices) should be taken into consideration. If the fault is not found after

checking these points, we recommend sending the device to the supplier.

Decommissioning!

Switch off the power supply on all poles if the device is to be

decommissioned. Secure the device against being unintentionally

switched on!

If the device is linked to other devices and/or equipment, consider the

impacts and take appropriate precautions before switching it off.

HE 5710 / 5711 Operating Instructions

# 371814 | Version 1.4