Digicom 8D5756 Manuel rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Digicom 8D5756. Digicom 8D5756 9 pages.

Imprimer la page

Pocket GPRS Micro Industrial

Pocket GPRS MicRo induStRial

Quick Guide 7D1851 ver. 1.0 03/2013

Congratulations for choosing Digicom Pocket GPRS Micro Industrial.

Pocket GPRS Micro Industrial is a GSM/GPRS Quad Band modem (850/900/1800/1900 Mhz) with

RS232 serial interface perfect for DATA connections and SMS applications, and with RS485 serial

interface for DATA connections.

It has been designed to operate on any digital GSM network both directly and in roaming.

TECHNICAL FEATURES

• GSM Module: GSM/GPRS Quad Band modem 850/900/1800/1900 Mhz

• GPRS Class 10

• GSM speed up to 9600 bps

• Built-in Full TCP/IP Stack

• Extended Power range from 9 to 32 Vdc

• Extended Temperature range: -20˚C / +55˚C

• RS232 serial interface on DB9 Female for AT commands

• RS232 serial interface on DB9 Female for DATA connections

• RS485 serial interface on screw terminal block for DATA connections

• DIN-rail Mounting Housing

• SMA connector for Antenna

• Led indicators

• Dimensions: 115 x 99 x 22,5 mm

• CE Mark and Rohs compliant

PACKAGE CONTENT

• 1 Pocket GPRS Micro Industrial (code 8D5756)

• 1 GSM Antenna with 3 meters cable (code 8E4432)

• 1 Antenna bracket for wall mounting (code 5D1774)

• 1 Screw terminal block at 4pin for power supply (code 2D0889)

• 1 Screw terminal block at 5pin for RS485 (code 2D0884)

• 1 Quick Guide (code 7D1851)

INSTALLATION

1. Insert the SIM card into Pocket GPRS Micro Industrial.

2. Connect the GSM antenna.

3. Connect the serial port RS232 or RS485 of Pocket GPRS Micro Industrial to your device.

4. Turn on Pocket GPRS Micro Industrial.

5. Check the GSM network status and GSM level through the Led indicators.

For further detail of the above operations, please read the following paragraphs.

FACTORY DEFAULT

RS232:

active for configuration and DATA connections.

ATS0=1

AT+IPR=9600

RS485:

deactive.

To activate, send the following AT command via RS232

AT+DG485=1,speed,data,parity,stop (e.g. AT+DG485=1,9600,8,E,1)

AT+ICF=3,1

AT&D0

AT+IFC=0,0

Quick Guide

8d5756

ENG.1