Epson 11880 - Stylus Pro Color Inkjet Printer Manuel de déballage et d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de déballage et d'installation pour {nom_de_la_catégorie} Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 28 pages. Stylus pro11880
Également pour Epson 11880 - Stylus Pro Color Inkjet Printer : Manuel de référence rapide (14 pages), Brochure (1 pages), Brochure & Specs (8 pages), Manuel du réseau (46 pages), Manuel d'information sur les produits (10 pages), Garantie limitée (12 pages), Brochure & Specs (7 pages), Brochure & Specs (8 pages)

Installing the ink cartridges

To install the ink cartridges, follow the

instructions below.

Warnings:

The ink cartridges are self-contained units.

Under ordinary use, ink will not leak from the

cartridges. If ink does get on your hands, wash

them thoroughly with soap and water. If ink gets

into your eyes, flush them immediately with

water.

Note:

The ink cartridges packaged with your printer are

partly used during the initial setup. In order to produce

high-quality prints, the print head in your printer will

be fully charged with ink. This one-off process

consumes a quantity of ink and therefore these

cartridges print fewer pages compared to subsequent

ink cartridges.

1. Turn on the printer by pressing the Power

button.

2. When the light starts flashing and the cover is

slightly opened, then open it by hand fully.

3. Check the ink cartridge and its slot.

1 2 3 4 5

Slot No.

Vivid Light Magenta

Light Light Black

Matte Black

Light Black

Light Cyan

Cyan

Vivid Magenta

Photo Black

Yellow

4. Remove the ink cartridge from the package,

and shake it for about 5 seconds.

Caution:

Do not touch the green IC chip on the side

of the ink cartridge. Doing so may prevent

normal operation and printing.

6 7 8 9

Ink color