Epson 11880 - Stylus Pro Color Inkjet Printer Manuel de déballage et d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de déballage et d'installation pour {nom_de_la_catégorie} Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 28 pages. Stylus pro11880
Également pour Epson 11880 - Stylus Pro Color Inkjet Printer : Manuel de référence rapide (14 pages), Brochure (1 pages), Brochure & Specs (8 pages), Manuel du réseau (46 pages), Manuel d'information sur les produits (10 pages), Garantie limitée (12 pages), Brochure & Specs (7 pages), Brochure & Specs (8 pages)

Epson 11880 - Stylus Pro Color Inkjet Printer Manuel de déballage et d'installation
Installing the Auto Take-Up Reel
Unit
Checking the contents
Make sure that all the items shown below are
included and not damaged.
Drive unit
Flange (for drive unit)
Reflector
Take-up reel core (3 inch)
Cable clamps (2)
6
Movable unit
Flange (for movable unit)
Movable unit stopper
Screws
(Large 2 [black], small 4)
Drafting tape

Installing the Auto Take-up Reel Unit

1. Attach the drive unit on the horizontal strut as
shown below, and tighten the black screws to
attach the drive unit to the printer securely.
2. Attach the flange (marked with R) on the drive
unit by pinching the knob.
The flange is reversible. One side is for the
3-inch core, and the other side is for the 2-inch
core. Set the appropriate side for the core.
3. Attach the clamps on the right base unit, and
route the cord through the clamps.