Epson 1520 - Stylus Color Inkjet Printer Manuel d'installation rapide - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Epson 1520 - Stylus Color Inkjet Printer. Epson 1520 - Stylus Color Inkjet Printer 17 pages. Epson stylus color 1520 printer quick setup
Également pour Epson 1520 - Stylus Color Inkjet Printer : Manuel de l'utilisateur (34 pages), Manuel de l'utilisateur (38 pages), Manuel de l'utilisateur (35 pages), Spécifications (2 pages), Manuel de l'utilisateur (13 pages), Remplacement des cartouches (2 pages), Fiche d'information sur le produit (4 pages), Manuel d'installation rapide (21 pages), Brochure (1 pages), Spécifications (1 pages), Supplement (1 pages)

Caution:

Never turn off the printer

while it's printing test

pages. Always press the

Pause button and eject

any loaded paper first.

Test the Printer

Turn off the printer and wait until the Operate light turns

off.

While holding down the Load/Eject button, turn on the

printer. Then release the Load/Eject button.

The first page prints on the first and last lines to measure

the page length. The next sheet prints a multicolor nozzle

check pattern and character samples at 360 dpi (dots per

inch).

Press the Pause button after the second page prints to

stop the test.

Press the Load/Eject button to eject any loaded pages.

Then turn off the printer.

If you have any problems with the test, see Chapter 7 in your

User's Guide for more information.

You can connect your EPSON Stylus COLOR 1520 printer to

either an IBM

need a shielded parallel cable to connect directly to a PC or an

Apple System Peripheral-8 serial cable to connect directly to a

Macintosh. (For a complete list of system requirements, see the

Introduction in your User's Guide.)

To connect your printer to a network interface you must first

install an optional interface card. See Appendix A of your

User's Guide for instructions.

Turn off the printer and your computer.

Connect the cable to the printer's parallel interface; then

squeeze the wire clips together until they lock in place. (If

your cable has a ground wire, connect it now.)

compatible PC or an Apple

Macintosh.

You'll