Axxess AXDSPL-BM1 Manuel d'instructions d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Axxess AXDSPL-BM1. Axxess AXDSPL-BM1 16 pages. Bmw/mini dspl interface for non-amplified vehicles withpre-wired harness2008-2016
Imprimer la page
16-pin Header
6
TOSLINK DIGITAL OUTPUT
AX-DSPL-SP
AX-DSPL-SP
• The AXDSPL-SP Toslink digital output can be used for adding a digital output to the interface.
1. Important! Unplug the interface from the vehicle.
2. Remove (4) Phillips screws securing the interface, then remove the top cover, exposing
16-pin Header
the circuit board within.
3. Locate the 16-pin header on the circuit board.
4.
Important!
Carefully line up the header pins to the AXDSPL-SP, with the Toslink port
facing outward. Gently press down to secure.
Note: Both interfaces may be damaged if installed wrong.
5. Re-secure the top cover provided with the AXDSPL-SP using the (4) Phillips screws
previously removed to complete the installation.
AX-DSPL-BT
AX-DSPL-BT
Continue to Mobile App