Epson 2090 - LQ B/W Dot-matrix Printer Manuel de l'utilisateur - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson 2090 - LQ B/W Dot-matrix Printer. Epson 2090 - LQ B/W Dot-matrix Printer 48 pages. Epson lq-2090: product brochure
Également pour Epson 2090 - LQ B/W Dot-matrix Printer : Manuel (11 pages), Fiche technique (7 pages), Spécifications (2 pages)
Imprimer la page
6.
Turn on your printer, then wait for the software to be installed. (This
may take a few minutes.)
If you are prompted to insert the Windows CD-ROM, go to step 7.
Otherwise, follow any instructions on the screen until the
installation is complete and you see the Installation screen again.
Then turn to page 15 and follow the instructions to install the
Reference Guide and the Remote Configuration Manager utility.
7.
If the installation asks for the Windows CD-ROM, insert the disk in
the CD-ROM drive and click OK . When the Windows installation
screen appears, close the screen to continue with the driver
installation.
Note:
If you see a message that the drive is not accessible, click Cancel and try
again.
8.
Click Browse and select the path for the printer driver. Then click
and follow the on-screen instructions.
OK
9.
Select the appropriate file in the folder and click OK .
10. When prompted, insert the printer software CD-ROM and click
to select the correct path.
Browse
Note:
If you see a message that the drive is not accessible, click Cancel and
try again.
If a "System Error" message appears, click Cancel .
If you are using Windows NT, you do not need to specify a path.
If you are using Windows 98, the Printer Utility Setup may start. If it
does, follow the instructions on the screen.
11. When the installation is complete, see page 15 to install the
Reference Guide and the Remote Configuration Manager utility.
14
Setting Up the Printer