Epson 2190 - FX B/W Dot-matrix Printer Manuel de l'utilisateur - Page 30
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson 2190 - FX B/W Dot-matrix Printer. Epson 2190 - FX B/W Dot-matrix Printer 48 pages. Impact printers
Également pour Epson 2190 - FX B/W Dot-matrix Printer : Manuel (11 pages), Spécifications (2 pages), Fiche technique (7 pages)
Imprimer la page
❏
The print head must not print past the left or right edge of the envelope or
other thick paper. Make sure your application program prints entirely
within the printable area of your envelope. See "Printer Specifications" in
the Reference Guide for more information on the printable area of
envelopes.
❏
If you are using No. 6 envelopes, make sure the left edge guide is aligned
with the arrow on the paper guide.
Postcards
You can feed postcards one at a time using the paper guide, or you can
load multiple cards using the optional high-capacity cut-sheet feeder
(bin 1 of the double-bin cut-sheet feeder). The cards can be loaded only in
the front or rear paper slot.
Before loading postcards, set the paper-thickness lever to position 2 and
set the paper release lever to the single-sheet position.
To load a single card, follow the
instructions in "Loading Single
Sheets with the Paper Guide" on
page 26. To load multiple cards,
see the Reference Guide.
Note:
❏
When you are loading
postcards long edge first,
always load them in the top
slot.
❏
Before printing, turn on the
card mode by pressing the
Tear Off/Bin
times until the left
Tear Off/Bin
❏
When loading A6 size cards, always load them long edge first.
30
Paper Handling
button several
light is on.