Axxess AX-MLINK-HD Manuel d'instructions d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Axxess AX-MLINK-HD. Axxess AX-MLINK-HD 8 pages. Car audio wi-fi a/v mirror interface through hdmi

Imprimer la page

Installation instructions for AX-MLINK-HD

Car audio Wi-Fi A/V mirror interface through HDMI

With this Wi-Fi interface you will be able to mirror your IOS or Android device on your aftermarket in-dash

mobile video screen.

Note: This will not allow the mobile device to be operated from the aftermarket screen. All operations

(button presses) will need to be executed from the mobile device.

Mirroring capabilities are determined by the smart devices' (phone, tablet, etc.) software and the network

provider's permissions given to the device. Software updates can change the devices ability to mirror

certain types of video/audio.

• Wi-Fi mirror interface

• Cable to Car Audio (power connection)

1. Power LED: Blue light on when power on.

2. Antenna connector: Connect external

Wi-Fi antenna.

3. Reset:

(a) Press 1 second for reset.

(b) Press 5 seconds for factory

default settings.

4. Mode/Upgrade:

(a) Press once for switching between IOS Air

Play system and Android Miracast system.

METRA. The World's best kits.™

AX-MLINK-HD

Interface components

• Wi-Fi antenna

Interface DescrIptIon

(b) Press 5 seconds for upgrading software.

5. USB: Charge (5-volts 1-amp)/software upgrade.

6. Power/AV-IN: Power cable connections

to car audio ACC/GND.

7. HDMI port: Output to radio (HDMI cable

s old separately).

1-800-221-0932

Installation to the aftermarket radio:

• Connect the Red wire to the accessory wire.

Note: It is suggested to add a 3A fuse in-line with

the accessory wire.

• Connect the Black wire to the ground wire.

• Connect an HDMI cable (not supplied), to the the

HDMI port in the AX-MLINK-HD.

Note: Make sure to place the interface in an area

you can easily access it in case the "Mode" needs

to be changed from IOS to Android, or vice versa.

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

metraonline.com

WIrInG tHe aX-mLInK-HD

(continued on next page)