Epson 4012364-00 Référence rapide - Page 21

Parcourez en ligne ou téléchargez le pdf Référence rapide pour {nom_de_la_catégorie} Epson 4012364-00. Epson 4012364-00 29 pages. Color laser printer

Imprimer la page

Messages

Description

This message appears when

Paper Type is specified with

Paper Source set to

there is no paper feed unit with

paper that matches the Paper

Size and Paper Type settings.

The engine sensor is dirty. Open

the front cover and remove the

waste toner collector

temporarily. Turn the large

green lever counterclockwise

to an upright position, then

return it to its original position.

Reinstall the waste toner

collector and close the front

cover to clear this error.

Printing by specifying the

number of copies is no longer

possible due to a lack of

memory (RAM) or free disk

space on the Hard Disk Drive. If

this error occurs, print only one

copy and end printing.

The side cover of the standard

lower cassette is open. Close

the cover and the error is

automatically cleared.

Messages

and

Description

The cover of the optional 500-

Sheet Paper Cassette Unit is

open. Close the cover and the

error is automatically cleared.

There is not enough memory for

duplex printing. The printer prints

only on the top side and ejects

the paper. To correct this error,

follow the directions below.

is set to

in the

SelecType Config Menu, (1)

press Continue or (2) reset the

printer by pressing the ALT and

Reset buttons at the same time.

is set to

in the

SelecType Config Menu, the

error is automatically corrected

after a certain period of time.

An unformatted ROM module

has been inserted. If the ROM

module has been formatted,

but is unreadable, format it

again. If the ROM is still

unreadable after reformatting,

take it to your dealer for repair

or replacement.

To clear this error, either press

the Continue button or turn off

the printer and remove the

ROM.