DigiDesign 96i I/O Manuel rapide - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} DigiDesign 96i I/O. DigiDesign 96i I/O 13 pages. 16-input, 2-output digital audio interface features 24-bit analog-to-digital (a/d) and digital-to-analog (d/a) converters
Également pour DigiDesign 96i I/O : Manuel (16 pages), Manuel (20 pages)
Imprimer la page
96i I/O Back Panel
Figure 2. 96i I/O back panel
Analog Inputs
The 96i I/O has 16 balanced, 1/4-inch TRS con-
nectors for analog audio input connections.
Inputs 1–4 provide six stages of software-ad-
justable operating level sensitivity. Choices
range from –12.0 dB(V) to +4.0 dBu, with de-
fault sensitivity set to –8 dB(V).
Inputs 5–16 are software-switchable between
–8 dBV and +4 dBu operating level sensitivity.
The 96i I/O inputs can accommodate a wide
range of line-level devices including synthesiz-
ers, samplers, sound modules, and effects de-
vices.
All analog inputs are balanced, and feature
24-bit, 96 kHz analog-to-digital converters, with
14 dB of headroom above +4 dBu (fixed, requir-
ing no calibration). Unbalanced connections are
supported with the use of standard 1/4-inch
mono phone plugs.
96i I/O input wiring for balanced connections
Tip
Hot (or +)
Ring
Cold (or –)
Sleeve
Ground
Analog Outputs
The 96i I/O has two balanced, 1/4-inch TRS
jacks for analog audio output connections.
The 96i I/O analog outputs feature 24-bit digi-
tal-to-analog converters. Output operating lev-
els are software-switchable between +4 dBu and
–10 dB(V) operating levels.
The 96i I/O is factory calibrated at +14 dB head-
room, yielding a maximum output level of
+18 dBu when in +4 dBu operating mode. When
set to –10 dB(V) operating mode, maximum
output level is +4 dBV.
Unbalanced connections are supported with the
use of standard 1/4-inch mono phone plugs.
96i I/O output wiring for balanced connections
Tip
Hot (or +)
Ring
Cold (or –)
Sleeve
Ground
Chapter 2: 96i I/O Hardware Overview
7