Epson ActionLaser 1600 Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson ActionLaser 1600. Epson ActionLaser 1600 10 pages. Epson actionlaser 1600: quick start
Également pour Epson ActionLaser 1600 : Lisez d'abord ce manuel (26 pages), Spécification du produit (2 pages)
Imprimer la page
EPSON ActionLaser 1600
Lower paper cassette unit
AC Power supply: DC 24V supplied by the printer
Paper weight:
60-90 g/ m
Paper feed:
Automatic feed delivery system:
Tray capacity up to 250 sheets
(75 g/m
Feeding speed:
For the first sheet, 22 seconds or less.
For subsequent sheets, up to 6 pages per
minute.
Paper type:
Plain paper, such as copier paper,
memo sheets, and letterhead
Dimensions and
Without the printer:
weight:
Height
Width
Depth
Weight
Selecting the Printer Driver
Your printer has several resident printer emulations: HP
LaserJet 4 (LJ4), EPSON ESC/ P 2, EPSON FX, and EPSON
GL/2. The HP emulation is the default setting. Because it
gives you the fullest range of features, you will probably not
change it.
For each emulation, you need to select an appropriate printer
driver. A printer driver translates the margins, fonts, and all
the other selections you have entered into control codes that
the printer understands.
For the HP emulation, use the ActionLaser 1600 driver,
which is included with the printer, to take full advantage
of your printer's features. You may also use any of the HP
LaserJet drivers listed below:
ActionLaser 1600
HP LaserJet 4
HP LaserJet 4Si
HP LaserJet IIISi
HP LaserJet IIIP/IIID
HP LaserJet III
If none of the above printers is listed, select any LaserJet
printer model.
For the LQ or FX emulations, select one of the following:
LQ-570
FX-870/1170
LQ-510/550
FX-850/1050
LQ-500
FX-800/1000
LQ-860
LX-100
LQ-850
LX-810/850
LX-800
AL1600-6
2
(16-24 lb)
2
or 20 lb paper)
79 mm (3.1 inches)
354 mm (13.9 inches)
407 mm (16 inches)
including the cassette
2.8 kg (6.2 lb)
including the cassette
Sharing Your Printer
Up to four computers can be connected directly to the printer
if you install optional interfaces and if each computer is
connected to a different interface port. If you need to connect
more than four computers or if you need to connect multiple
computers to the same port, you can indirectly connect the
computers to the printer by using a switch box.
The ActionLaser 1600 comes with a built-in parallel interface
®
(Centronics
compatible) and a serial (RS-232C/RS-422)
interface. The printer has a slot for one optional Type-B
interface board.
TM
SelecType
Settings
The following table lists the items available on the SelecType
menus.
Menu
Items
PRINTING
COPIES
PAGE SIZE
ORIENTATION
MANUAL FEED
RITech
LJ4
FONT SRC
FONTNUMBER
PITCH
HEIGHT
SYM MET
FORM
JOB
PAGE PROTECT
RESOLUTION
TIMEOUT
EMULATION PARALLEL
SERlAL
L/T*
AUX*
TRAY SIZE
STD SIZE
OPTSIZE*
Available only with option
5/10/94
Menu
Items
CONFIG
STD TRAY*
OPTTRAY*
SIZEIGNORE
AUTO CONT
STANDBY
DENSITY
AUTO SENSE
TOP OFF SET
LEFT OFF SET
TONER
TONER LIFE
PAGE COUNT
SelecTYPE INIT
PARALLEL
SPEED
BI-D
SERIAL
SERIAL TYPE
WORD LENGTH
BAUD RATE
PARITY
STOP BIT
DTR
XON/XOFF
DSR
TEST
STATUS SHEET
LJ4 FONT SAMPLE
ESC P2 FONT
SAMPLE
FX FONT SAMPLE
FACTSHEET
RlTech TESTPAGE
Laser Printers