ABB PSTB570 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ABB PSTB570. ABB PSTB570 10 pages. Softstart upgrade to torque control

11. Remove the old LV-Board and disconnect the

cables from the Display and the Keypad.

12. On PSTB unit remove the cables from the

built in by-pass contactor after marking them.

13. Mount the cables from the Display and the

Keypad on the new LV-Board.

On PSTB units, reconnect the cables from

the built in by-pass contactor. Be careful

how you connect the Red (L) and Brown

(N) cable.

14. Mount the new LV-Board with the six

screws.

15. Mount the connector. Be careful to avoid

damage on the pins.

- 4 -

L N