Epson ActionPrinter 3260 s Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson ActionPrinter 3260 s. Epson ActionPrinter 3260 s 15 pages. Epson actionprinter 3260: product information

Imprimer la page

ActionPrinter 3260

5. Insert the paper cassette into the printer as far as it will go.

The edge of the paper stack extends beyond the front of

the printer.

Running the test

Make sure the printer is turned off.

While holding down the FF (FORM FEED

turn on the printer. It loads the paper automatically and

begins the self test.

The printer prints characters in the current font and character

table. If the optional color upgrade kit is installed, the self

test is in color.

Note:

If the paper cassette is empty when you turn the power on, the

printer beeps three times and the light blinks. Load paper as

described earlier; then press the

To stop the self test, turn off the printer.

Each time you turn on the printer, it beeps four times -two

long and two short.

Note:

If you hold down both the FF and the FONT buttons while you turn

on the printer, it prints a special demonstration page that describes

and illustrates many features.

Using Software Programs

To take full advantage of your printer's features, find the

instructions for your software programs below.

Microsoft

Windows™ 3.1 and all Windows Programs

If Windows is already installed on your system, follow the

steps below to set it up with your printer. Then your printer

will work correctly for all your Windows programs, such as

Word for Windows, Lotus

CorelDRAW

AP-3260-8

) button,

button to start the selftest.

l-2-3® for Windows, and

If Windows is not already installed on your system, run the

setup program as described in the Windows documentation

and follow steps 4 through 10 below when you reach the

section for choosing a printer.

In the window labeled Main, double click the Control

Panel icon.

Double click the Printers icon.

Choose the Add> button on the right side of the screen.

In the list of printers box, select Epson ActionPrinter 3260.

If ActionPrinter 3260 is not available, select Epson LQ-860

or Epson LQ-2550 if you plan to use color. If you do not

plan to use color, choose Epson Stylus 800, Epson

LQ-570+, Epson AP-3250, or Epson LQ-870.

Choose the Install button. A dialog box may instruct you to

insert a diskette.

If necessary, insert the diskette required.

Choose the Setup button.

Select 360 x 180 as the Resolution.

If you selected the LQ-860, LQ-2550, LQ-570+, or LQ-870

printer, select Sheet Feeder - Bin 1 as the Paper Source.

This step is very important for proper page breaks in your

documents.

10. .Choose the OK button.

11. Highlight Epson ActionPrinter 3260 (or the printer you

added) and click the button labeled Set As Default

Printer.

12. Click the

button.

You have now installed the printer driver for Windows.

Fonts with Windows

Microsoft Windows standard drivers use scalable TrueType™

fonts rather than the fonts built into the printer. Windows

fonts look the same on the screen as they do in your printed

document. (This feature is called WYSIWYG, What You See

Is What You Get.) All programs that run under Windows can

use the Windows printer driver to print their files. Therefore,

you have access to the full range of TrueType fonts if you use

one of the Windows drivers listed in step 4 above.

If you want to use the printer's internal fonts as well as the

TrueType fonts, contact Microsoft Windows Product Support

and ask for a driver that uses both kinds of fonts.

Non-Windows Software Programs

Most application programs let you specify the type of printer

you use so that the program can take full advantage of the

printer's features. Many programs provide an installation or

setup menu that presents a list of printers.

1/94

24-Pin Printers