CIRCUIT DESIGN STD-302 Manuel d'utilisation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CIRCUIT DESIGN STD-302. CIRCUIT DESIGN STD-302 16 pages. Uhf narrow band radio transceiver 429 mhz
Également pour CIRCUIT DESIGN STD-302 : Manuel d'utilisation (20 pages)

Imprimer la page

Compliance

STD-302 419 MHz was designed to be installed in radio equipment for use in China. The regulations and the

technical specifications referred to in the design phase are shown in Table 1 and 2 below.

Table 1 Regulation

Product

Country

Application specified

Generic regulation

Reference URL

Table 2 Specification

Specification specified in the generic regulation

Frequency

Output power

Band width

Spurious emission

Frequency tolerance

The relevant laws and regulations are subject to change. Circuit Design, Inc. is not responsible for the validity and

the accuracy of our understanding and translation relating to the regulation and specification above.

Compliance assessment

This product was designed to meet the specification above, however it has not been assessed for conformity with

the appropriate regulations. Uses are required to verify that their final product meets the appropriate specifications

and to perform the procedures for regulatory compliance.

Guarantee of regulatory compliance

We only guarantee that this product meets the specification in this document. We are exempt from any other

responsibilities relating to regulatory compliance.

We also recommend that the user consults the authorities in the relevant country for detailed regulatory information

such as valid regulations, test specifications, assessment procedures, marking methods etc, before starting any

project with this product.

If technical documentation is required for compliance assessments, we will provide any documents, which may be

considered necessary for assessment, under NDA. The documentation is only available in English.

OG_STD-302-419M_v10e

Regulatory compliance information

STD-302 419 MHz

China

419 MHz band for industrial remote control device

Preliminary regulation for low power (short range) devices (Ministry

of Information Industry May 1998)

SRRC: http://www.srrc.gov.cn/

418.950 MHz, 418.975 MHz, 419.000 MHz, 419.025 MHz,

419.050 MHz, 419.075 MHz, 419.100 MHz, 419.125 MHz,

419.150 MHz, 419.175 MHz, 419.200 MHz, 419.250 MHz,

419.275MHz

< 10 mW

< 16 kHz

< 2.5 µW

-6

< 4 x 10

OPERATION GUIDE

Circuit Design, Inc.