Epson AcuLaser C1000 Manuel de référence rapide

Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} Epson AcuLaser C1000. Epson AcuLaser C1000 9 pages. Color laser printer
Également pour Epson AcuLaser C1000 : Manuel de configuration (42 pages)

Imprimer la page

Ready and Error Lights

The ready (green) and error (red) lights on
the top of the printer may be the first
indication of trouble. The status of the lights,
on, off or flashing, indicates your printer
status as described below.
The Status Alert window in the EPSON
Status Monitor 3 utility indicates what type
of error has occurred and offers you a
possible solution. Look through this section
to find the kind of problem you have, then
try the recommended solutions in the order
they are presented until your problem is
solved.
ready light
error light
EPSON AcuLaser C1000 Quick Reference
Ready
Error
Light
Light
(green)
(red)
Off
Off
On
Off
Flashing
Off
Slow
Off
flashing
On
Flashing
On
On
Flashing
On
Off
On
Flashing alternately.
Note:
If the problem remains after trying the
suggestions in this section, contact your dealer
for assistance.
Printer Status
Printer's power is turned off.
Printer is ready for printing or
printing a job. To get current
information about the printer,
check the EPSON Status
Monitor 3 utility.
Printer is warming up,
receiving data, or adjusting
for printing.
A consumable product is
almost used up. Check the
alert message of EPSON
Status Monitor 3 utility and
replace the consumable with
a new one.
There is an error that can be
easily remedied. Check the
alert message of EPSON
Status Monitor 3 utility for the
solutions.
The cover of the printer is
open, the printer is out of
paper, or paper is jammed in
the printer. When printing with
the duplex unit, make sure
that the paper size setting is
correct.
Protocol error has occurred.
Try turning off the printer and
then turning it back on. If this
does not clear the error,
contact your dealer or a
qualified service person.
An error has occurred. Try
turning off the printer and
then turning it back on. If this
does not clear the error,
contact your dealer or a
qualified service person.
Ready and Error Lights (1/1)