Epson Artisan 1430 Commencer ici
Parcourez en ligne ou téléchargez le pdf Commencer ici pour {nom_de_la_catégorie} Epson Artisan 1430. Epson Artisan 1430 4 pages. All-in-one printer epson artisan 1430
Également pour Epson Artisan 1430 : Manuel d'instructions de sécurité importantes (12 pages), Manuel de la gamme (7 pages), Manuel d'instructions d'installation (7 pages)
Imprimer la page
Artisan
1430
®
Start Here
Read these instructions before using your product.
1
Unpack
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
1
Remove all protective materials.
2
Open the printer cover and remove any tape inside.
2
Turn on
1
Connect the power cord to the back of the printer and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Press the
power button
*412173500*
*412173500*
.
3
Install ink cartridges
1
Open the printer cover, then open the ink cartridge cover.
2
Unpack the ink cartridges.
3
Remove only the yellow tape from each cartridge.
Caution:
Don't remove any other seals or the cartridges
may leak.
4
Insert the cartridges in the holder for each color. Press
each cartridge down until it clicks.
5
Close the ink cartridge cover, then close the
printer cover.
6
Press the
ink button to begin priming the ink. This
takes about 3 minutes. Do not turn off the printer, load
paper, or open any covers until the process is complete.
Note:
Your printer ships with full cartridges and part of the
ink from the first cartridges is used for priming the printer.
Replacement cartridges will print more pages.
Caution:
Don't turn off the printer while it is priming or you'll
waste ink.