Archer Components TRAIL D1X Manuel d'installation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Archer Components TRAIL D1X. Archer Components TRAIL D1X 8 pages.
Imprimer la page
5. If using the Double Strand buttons, remember that both buttons on a single
wire will have the same function (either shift up or shift down). You cannot
program one button on the wire to shift up and the other to shift down.
Note: Do not cover the rubber portion of the shift button with bar tape,
this will impede button performance. You must be able to feel the button
click under the rubber.
Step 4:
Pair Remote and Shifter
1. Turn on the D1x Shifter.
2. Pair the Archer app with the D1x Shifter.
3. Go to Settings > Pair Remote and press Proceed.
4. Turn on the D1x Shifter.
5. Turn on the Remote.
6. The Remote LED will flash green and then orange 2 times then go off.
The Shifter LED will flash green indicating that it is connected to the remote.
7. The pairing process is complete.
7